ABB IRB 6640 Foundry Prime, Руководство по эксплуатации продукта, Страница: 415 / 496

Note Action
xx1000000383
Clean the joint surface outside the o-ring. 4
Parts:
• A: Flange sealing (Loctite 574)
• B: Joint surface
See figure above. Apply flange sealing (Loctite 574) on the
joint surface outside the o-ring as shown in
the figure.
5
Refitting gearbox axis 2 to the frame
Use this procedure to refit gearbox axis 2.
Note Action
CAUTION
The gearbox weighs 98 kg! All lifting equip-
ment used must be sized accordingly!
1
For art. no. see:
• Required equipment on page 406
xx1000000378
Fit the lifting tool , in the uppermost hole of
the gearbox axis 2 and secure it with a
roundsling in an overhead crane or similair.
2
Part:
• A: Lifting tool
Continues on next page
Product manual - IRB 6640 Foundry Prime 415
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.2 Replacing gearbox axis 2
Continued