ABB i-bus KNX FCL/S 1.6.1.1, Руководство по эксплуатации продукта, Страница: 61 / 104

ABB i-bus
®
KNX
Start-up
FCL/S x.6.1.1 | 2CDC508116D0203 59
The following parameters appear when Staircase light is selected:
Extending staircase lighting by
multiple operation ["pumping up"]
Options: no (not retriggerable)
Yes (retriggerable)
Up to max. 2 x staircase lighting time
Up to max. 3 x staircase lighting time
Up to max. 4 x staircase lighting time
Up to max. 5 x staircase lighting time
If a further ON telegram is received during the staircase lighting time sequence, the remaining stair-
case lighting time can be extended. This is possible by repeated actuation of the push button
("pumping up") until the maximum parameterized number of retriggering operations is reached. The
maximum time can be set to 1, 2, 3, 4 or 5 times the staircase lighting time.
Let's say the staircase lighting time has been extended by "pumping up" to the maximum time. If
some of the time has already elapsed, the staircase lighting time can be re-extended to the maxi-
mum time by "pumping up" again. However, the parameterized maximum time may not be exceed-
ed.

No (not retriggerable) : The receipt of an ON telegram is ignored. The staircase lighting time
continues unmodified to completion.

Yes (retriggerable) : New ON telegrams reset the staircase lighting time and starts to count
again. This process can be repeated as often as desired using this selection.

Up to max. 2/3/4/5 x staircase lighting time : New ON telegrams extend the staircase lighting
time by 2/3/4/5 times.
Staircase lighting time
in s [1…65,535]
Options:
1…30…65,535
The staircase lighting time defines how long the contact is closed
– provided that the contact is pro-
grammed as a n/o contact
– and how long the light remains on after an ON telegram. The input is
made in seconds.
Staircase lighting can be switched
Options: ON with 1 and OFF with 0
ON with 1, no action with 0
ON with 0 or 1, switch OFF not possible
This parameter defines the telegram value used for switching the staircase lighting on and off
prematurely.

ON with 0 or 1, switch OFF not possible : The function Staircase lighting is switched on inde-
pendently of the value of the incoming telegram. Premature switch off is not possible.