ABB i-bus KNX FCL/S 1.6.1.1, Руководство по эксплуатации продукта

Страница: 59 / 104

ABB i-bus
®
KNX
Start-up
FCL/S x.6.1.1 | 2CDC508116D0203 57
Enable communication object
"Status Switch" 1 bit
Options: No
Yes

Yes : The following parameters appear:
Send object value
Options: No, update only
Only after changing
After request
After a change or request

No, update only : The status is updated but not sent.

Only after changing : The status is sent after a change.

After request : The status is sent after a request.

After a change or request : The status is sent after a change or a request.
Object value of contact position
Options: 1 = closed, 0 = open
0 = closed, 1 = open
This parameter defines the communication object value of the switch status ( Status switch ).

1 = closed, 0 = open : A closed contact is represented by communication object value 1 and an
open contact by 0.

0 = closed, 1 = open : A closed contact is represented by communication object value 0 and an
open contact by 1.
Note
The contact position and thus the switch status can be the result of a series of priorities and
links.