ABB i-bus KNX FCL/S 1.6.1.1, Руководство по эксплуатации продукта

Страница: 12 / 104

ABB i-bus
®
KNX
Device technology
10 2CDC508116D0203 | FCL/S x.6.1.1
2.1.2 Lamp output load
at 230 V AC
Lamps Incandescent lamp load 1200 W
Fluorescent lamps T5/T8 Uncorrected
Parallel compensated
DUO circuit
800 W
300 W
350 W
Low-voltage halogen lamps Inductive transformer
Electronic transformer
Halogen lamps 230 V
800 W
1000 W
1000 W
Dulux lamp Uncorrected
Parallel compensated
800 W
800 W
Mercury-vapor lamp Uncorrected
Parallel compensated
1000 W
800 W
Switching capacity (switching contact)
Maximum peak inrush current I
p
(150

s)
Maximum peak inrush current I
p
(250

s)
Maximum peak inrush current I
p
(600

s)
200 A
160 A
100 A
Number of electronic ballasts
(T5/T8, single element)
1)
18 W (ABB EVG 1 x 18 SF)
24 W (ABB EVG-T5 1 x 24 CY)
36 W (ABB EVG 1 x 36 CF)
58 W (ABB EVG 1 x 58 CF)
80 W (Helvar EL 1 x 80 SC)
10
10
7
5
3
1)
For multiple element lamps or other types the number of electronic ballasts must be determined using the peak inrush current of the ballasts.
Device type Application Maximum number of
Communication objects
Maximum number of
group addresses
Maximum number of
associations
FCL/S 1.6.1.1 Switch Blower 1f 6A/1.0* 64 254 254
FCL/S 2.6.1.1 Switch Blower 2f 6A/1.0* 124 254 254
* … = current version number of the application.
Please refer the software information on our homepage for this purpose.
Note
ETS and the current version of the device application are required for programming.
The current version of the application is available for download at
www.abb.com/knx . After import into
ETS it appears in the Catalogs window under Manufacturers/ABB/Heating , Ventilation, Air condition-
ing/Ventilation actuator.
The device does not support the locking function of a KNX device in ETS. If you use a BCU code to
inhibit access to all the project devices, it has no effect on this device. Data can still be read and pro-
grammed.