ABB i-bus KNX FCL/S 1.6.1.1, Руководство по эксплуатации продукта

Страница: 17 / 104

ABB i-bus
®
KNX
Start-up
FCL/S x.6.1.1 | 2CDC508116D0203 15
3 Start-up
The blower actuator is parameterized with the Switch Blower 1f 6A/1.0 (FCL/S 1.6.1.1) or Switch Blow-
er 2f 6A/1.0 (FCL/S 2.6.1.1) application, and ETS Engineering Tool Software. The application provides the
device with a comprehensive and flexible range of functions. The standard settings allow simple commis-
sioning. The functions can be extended if required.
3.1 Overview
The following functions are available:
Fan
A three-speed fan is controlled alternately with a two-way connection or with speed
switching.
stagePower outlets (sockets) For power supply to individual power outlet circuits and other loads.
Illumination For power supply to individual lighting circuits and other loads.
Caution
Improper switching will destroy the fan motors.
Follow the technical data for the fan, e.g. speed or switching function.
For further information see: Parameter window A: Fan (Multi-level) , p.21.
The blower actuator features relays in each output which are mechanically independent of the other out-
puts. Switching noises cannot be avoided due to the mechanical nature of the design.
The device is installed primarily in the distribution board together with the circuit-breakers and RCCBs.
Usually, the blower actuator is used in conjunction with a room thermostat for an individual room tempera-
ture control system. The room thermostat sends a control value which the blower actuator uses to control
the fan speeds.