ABB i-bus KNX FCL/S 1.6.1.1, Руководство по эксплуатации продукта

Страница: 11 / 104

ABB i-bus
®
KNX
Device technology
FCL/S x.6.1.1 | 2CDC508116D0203 9
Output switching times
3)
Maximum output relay position change per mi-
nute if all relays are switched simultaneously.
The position changes should be distributed
equally within the minute.
1.6.1.1 2.6.1.1
60 30
Maximum output relay position change per mi-
nute if only one relay is switched. 240 240
Connections KNX Via bus connection terminals,
0.8 mm Ø, solid
Load circuits Screw terminal
0.2…2.5 mm
2
fine stranded
0.2...4 mm
2
solid
Tightening torque max. 0.6 Nm
Operating and display elements Programming Button/LED For assignment of the physical address
Degree of protection IP 20 To EN 60 529
Protection class II To EN 61 140
Isolation category Overvoltage category III to EN 60 664-1
Pollution degree 2 to EN 60 664-1
KNX safety extra low voltage
SELV 24 V DC
Temperature range Operation
Storage
Transport
-5
°C…+45 °C
-25 °C
…+55 °C
-25 °C
…+70 °C
Ambient conditions Maximum air humidity
95 %, no condensation allowed
Design Modular installation device (MDRC) Modular installation device, Pro M
FCL/S Type 1.6.1.1 2.6.1.1
Dimensions
90 x W x 64.5 mm (H x W x D)
Width W in mm
72 108
Mounting width in units (18 mm modules)
4 6
Mounting depth in mm
64.5 64.5
Weight 1.6.1.1 2.6.1.1
in kg 0.13 0.24
Installation
On 35 mm mounting rail
To EN 60 715
Mounting position As required
Housing/color Plastic housing, gray
Approvals KNX to EN 50 090-1, -2 Certification
CE mark
In accordance with the EMC guideline and low
voltage guideline
3)
The specifications apply only after the bus voltage has been applied to the device for at least 30 seconds. Typical relay delay is approx. 20 ms.