ABB i-bus KNX FCL/S 1.6.1.1, Руководство по эксплуатации продукта

Страница: 37 / 104

ABB i-bus
®
KNX
Start-up
FCL/S x.6.1.1 | 2CDC508116D0203 35
Send object value "Fault control value"
Options: No, update only
Only after changing
After request
After a change or request

No, update only : The status is updated but not sent.

Only after changing : The status is sent after a change.

After request : The status is sent after a request.

After a change or request : The status is sent after a change or a request.
Set control value during fault
Options: No
Yes
This parameter sets how the output reacts in the event of an error.

Yes : The following parameter appears:
Control value in % [0...100]
Options: 0...30...100
This parameter sets what percentage to use for the control value in the event of an error.