![background image](http://html.mh-extra.com/html/abb/acs580-series/acs580-series_firmware-manual_2311053.webp)
Settings, I/O and diagnostics on the control panel 49
Fieldbus
Use the settings in the
Fieldbus
submenu to use the drive with a fieldbus:
• Modbus (RTU or TCP)
• PROFIBUS
• PROFINET
• Ethernet/IP Rev D: more
You can also configure all the fieldbus related settings via the parameters (parameter
groups
,
), but the purpose of the
Fieldbus
menu is to make
the protocol configurations easier.
Note that only Modbus RTU is embedded and the other fieldbus modules are optional
adapters. For the optional modules, the following adapters are required to the needed
protocols:
• ModbusTCP: FENA-11/-21
• PROFIBUS: FBPA-01
• PROFINET FENA-11/-21
• Ethernet/IP: FENA-11/-21
The table below provides detailed information about the available setting items in the
Fieldbus
menu. Note that some of the items only became active once you have d
fieldbus.
Menu item
Description
Corresponding
parameter
Fieldbus selection
Select this if you want to use the drive with a
fieldbus.
ACS580 FW.book Page 49 Wednesday, September 21, 2016 9:48 PM
Содержание ACS580 Series
