![background image](http://html.mh-extra.com/html/abb/acs580-series/acs580-series_firmware-manual_2311025.webp)
Start-up, control with I/O and ID run 21
2 – Additional settings: Start, stop and reference values
If you do not wish to use a macro, define the
settings for start, stop and reference:
Select
Start, stop, reference
and press
(
Select
) (or
).
Adjust the parameters according to your needs.
Select parameter and press
(
Select
).
When you change the settings, you also change
the use of the I/O signals in the drive. Make sure
the actual I/O wiring and the use of I/O in the
control program match each other. You can check
the current I/O use in the
I/O
menu under the
Main
After making the adjustments, go back to the
Primary settings
menu by pressing
(
Back
).
2 – Additional settings: Ramps
(acceleration and deceleration times for the motor)
Select
Ramps
and press
(
Select
) (or
).
Adjust the parameters according to your needs.
Select a parameter and press
(
Edit
).
After making the adjustments, go back to the
Primary settings
menu by pressing
(
Back
).
ACS580 FW.book Page 21 Wednesday, September 21, 2016 9:48 PM
Содержание ACS580 Series
