ABB AC500-S Скачать руководство пользователя страница 9

Страница: 9 / 452

Rev.

Description of version / changes

Who

Date

1.0.3

Various typos were corrected. Additional abbreviations were

included in the abbreviation list.

The entire document was re-styled:

The yellow background on notices and recommendations was

replaced by a light-grey background because of document

standardization.

"DANGER" and "NOTICE" symbols were replaced by standard

symbols from German Standard DIN 4844-2 in text boxes.

The text was changed in the document:

More standard terms are now used in the document.

Values for storage and transport temperatures were extended.

Vertical mounting option (with derating) is added for SM560-S

Safety CPU and corrected for DI581-S and AI581-S Safety I/O

modules.

LREAL is not supported by SM560-S Safety CPUs and was

removed from the document.

POU SF_MAX_POWER_DIP_GET description was modified.

"DANGER" text box was added for POU

SF_DPRAM_PM5XX_S_SEND to explain limitations for POU

usage.

F_WD_Time2 and Device_WD2 term definitions in Chapter 5.3

were corrected.

"F_Host_WD" was replaced with "the value set using

SF_WDOG_TIME_SET" inside of “NOTICE” box in Chapter 5.3

ABB

28.05.2015

1.0.4

Various typos were corrected. Minor improvements in the text.

Major changes:

Licensing information was updated:

Ch. 4.1: Notice Block with reference to PS501-S license installa-

tion removed.

Ch. 4.2: Figure 63 updated (Programming workflow, step 2) was

enhanced for the license handling of Automation Builder version

V2.0.2 (or higher).

Ch. 4.3.2: “Licence activation” was extended with additional

licensing information for usage of Automation Builder version

V2.0.2 (or higher).

Additional information according to the new F-Host library “SAFETY-

BASE_PROFIsafe_AC500_V22_Ext.lib” was added:

Ch 4.6.1: Table for library “SAFETYBASE_PROFI-

safe_AC500_V22_Ext.lib” was updated.

Ch. 4.6.3: The chapter was updated and renamed acc. to the

new library name “SAFETYBASE_PROFI-

safe_AC500_V22_Ext.lib”.

Ch. 6.2: Checklist item 20 was updated according to the new

library name “SAFETYBASE_PROFIsafe_AC500_V22_Ext.lib”.

ABB

27.03.2017

Introduction

Document history

30.03.2017

AC500-S

Содержание AC500-S





































































































































































































































































































































































































































































Результаты поиска

Содержание AC500-S

Отзывы:

Бренды по названию

Популярные бренды

ABB AC500-S, Руководство по безопасности пользователя

Результаты поиска

Содержание AC500-S

Отзывы:

Бренды по названию

Популярные бренды