22
Make sure the saw chain is properly
tensioned.
WARNING:
The saw chain will
spin after the unit starts. Keep hands
and feet clear of the saw chain and do
not allow the saw chain to contact any
objects.
OPERATION
Use this product outdoors, in dry
conditions and in temperatures
between 5°C and 45°C.
WARNING:
Do not expose
power tools to rain or wet conditions.
n
POLE CHAINSAW
WARNING:
Always check
the chain tension and adjust as
necessary before beginning operation.
Refer to “The Chain Tension” in the
“Maintenance” section.
Checking the chain lubrication
WARNING:
Make sure the
chain oil tank is full before operation.
Check the oil level constantly so that it
does not drop below half full. The saw
chain must be continuously coated with
oil to function properly. An insufficient
amount of lubricating oil is evidenced
by smoke, guide bar discoloration or
pitch build-up.
NOTE:
This product is equipped
with an automatic oiling system! The
oiling system automatically delivers
the proper amount of oil to the bar
and chain!
Checking the lubrication requires
starting the engine. Before checking the
product must be fully assembled and all
instructions must have been read.
a) Make sure the guide bar and the
saw chain are in place when you
check the oil delivery.
b) When the unit is running, check if
the chain oil comes off the tip of the
bar as shown in the figure below.
WARNING:
Always wear
appropriate eye, hearing, hand, foot
and body protection to reduce the risk
of injury when operating this unit. Wear
head protection. Use a full face shield
when needed. Refer to the “Safety”
section for appropriate safety
equipment information.
WARNING:
Do not use a pole
saw to fell a tree. Do not use a pole saw
to limb or buck a fallen tree.
Tips For Best Results
1. Follow all safety instructions. Refer to
the “Safety” section
2. Only cut wood and materials made of
wood. Do not attempt to cut sheet
metal, plastics, masonry or any other
non-wood materials
3. Practice cutting a few small logs
