15
motor off. The saw chain will then
coast to a stop.
LOCK SWITCH- A device that prevents
the unit from starting accidentally. The
trigger cannot be squeezed unless the
switch lockout is manually engaged.
KICKBACK - A sudden backward
and/or upward motion of the guide
bar and saw chain. Kickback can
occur if the upper portion of the
guide bar tip touches an object while
the saw chain is spinning (rotational
kickback). Kickback can also occur if
the wood closes in and pinches the
saw chain inside the cut (linear
kickback).
ROTATIONAL KICKBACK - A sudden
backward and upward motion of the
guide bar and saw chain. Rotational
kickback can occur if the upper portion
of the guide bar tip touches an object
while the saw chain is spinning. The
guide bar and saw chain are then
kicked up and back toward the
operator in a lightning-fast reverse
reaction.
LINEAR KICKBACK (PINCH KICKBACK) -
A sudden backward motion of the
guide bar and saw chain. Linear (pinch)
kickback can occur if the wood closes
in and pinches the saw chain inside a
cut. The saw is then sent straight back
toward the operator.
NORMAL CUTTING POSITION - The
positions assumed while making
bucking and felling cuts.
LIMBING - The process of removing
branches from a fallen tree.
PRUNING - The process of cutting limbs
from a living tree.
ASSEMBLY
WARNING:
To prevent serious injury,
never assemble, disassemble or adjust
the unit while it is running. Always
disconnect the unit from the power
source to prevent the unit from starting
accidentally. Always allow the unit to
cool before assembling, disassembling
or adjusting the unit.
Unpack
1. Unpack all parts and lay them on a flat,
stable surface.
2. Remove all packing materials and
shipping devices if applicable.
3. Make sure the delivery contents are
complete and free of any damage. If
you find that parts are missing or
show damage do not use the product
but contact our customer service
center. Using an incomplete or
damaged product represents a hazard
to people and property.
4. Ensure that you have all the
accessories and tools needed for
assembly and operation.This also
includes proper personal protective
equipment.
WARNING:
Be careful with
small parts that are removed during
assembly or when making adjustments.
Make sure you do not lose them.
Packing list
-
Chainsaw Powerhead
1pc
- Chain Sheath
1pc
- Extension Tube
1pc
- Hex. Wrench
1pc
- Shoulder Strap
1pc
