AAVIX A11706, Руководство пользователя

Страница: 38 / 40

38
tumbling over.
STORAGE
WARNING:
To prevent
serious injury, never clean the
unit while it is running. Always
disconnect the unit from the power
source to prevent the unit from
starting accidentally. Always allow the
unit to cool before cleaning the unit.
WARNING:
To prevent
serious injury, do not douse the
unit with water. Do not submerge the
unit in water or any other liquid. Do
not use strong detergents. Household
cleaners that contain aromatic oils such
as pine and lemon, and solvents such
as kerosene, can damage plastic.
WARNING:
Always clean
the product after using it. Lack
of proper cleaning can cause damage
to the product and produce a
malfunction. Whenever possible, clean
immediately after use.
ATTENTION!
The chain of
the product has very sharp
teeth. Always use security gloves.
1. Loosen the saw chain if the chain
tension was adjusted during
operation. The saw chain will contract
as the unit cools, which could damage
the unit if the chain is too tight.
2. Clean the unit with a damp cloth.
WARNING:
Never use
gasoline, solvents, detergents,
water or any other liquid to clean the
product.
NOTE:
When preparing the unit for
long-term storage (30 days or more),
remove the guide bar and saw chain.
Carefully clean the guide bar sheath,
guide bar mounting surface and
sprocket. Use a firm non-wire brush to
clean the guide bar groove. Reassemble
the unit.
3. Wipe off any moisture with a soft
cloth.
4. Lightly coat the guide bar and saw
chain with a corrosion- inhibiting oil.
5. Store this product within the
temperature range 0°C and 45°C.
6. Loosen the saw chain if the chain
tension was adjusted during operation.
The saw chain will contract as the unit
cools, which could damage the unit if
the chain is too tight.
7. Allow the unit to cool.
8. Thoroughly clean the unit and inspect
it for any loose or damaged parts.
Repair or replace damaged parts and
tighten loose screws, nuts or bolts.
9. Cover the guide bar and saw chain
with the chain sheath.
10. Lock up the unit to prevent
unauthorized use or damage.
11. Store the unit in a clean, dry,
well-ventilated area, and on a flat
surface.
12. Always unplug the product from the
power source before storing.
NOTE:
It is normal for bar and chain
oil to seep from the unit when not in
use. Please take this into consideration
when storing the unit.