6/1531-ANF 901 14 Uen F1 2013-11-29
45
M
OUNTING
& I
NSTALLATION
5.11.5 External
antennas
with the Outdoor housing
5.11.5.1 BS340
Instead of the provided standard antenna set, NTM/KRENB 101 116,
two external non-standard antennas NTM/KRENB 101 119/1 can be
used. See chapter 5.10 Non-standard antennas. on page 35
The external antennas cables lead through the gland for the data cable,
while the data/power cable goes via the power cable gland directly to the
Data/Power outlet (RJ45) or to the connection box NEF 181 01/4. If the
connection box NEF 181 01/4 is used for cabling, it must fasten inside
the Outdoor housing by double-sided self adhesive tape or hot-melt
adhesive glue (to be sourced locally)
The Data/Power cable goes via the power gland to the Data/Power
outlet (RJ45) or to the connection box NEF 181 01/4.
5.11.6 Post
mounting
measures
When the Outdoor housing is mounted in place with the connected base
station and the connection box inside, then clean up the workplace.
Remove all tools and all materials not included in the mounting of this
Outdoor housing and base station.
Any front plates and other cabinet plates that have been removed, must
be remounted with the sealing gasket in the right position.
After the installation of all other PBX equipment, test the functions
according to the installation test instructions for CORDLESS PHONE.
5.12
Installation of the portables
5.12.1 Initiation
For initiation of portables see operational directions for
CORDLESS
EXTENSION, CX
.
5.12.1.1
Unlocking of a portable part
When the third attempt to unlock a PP with the PIN code has failed, the
only way to unlock the PP is to use the IPEI code. See directions for use
for relevant PP.
