C
ORDLESS
P
HONE
44
6/1531-ANF 901 14 Uen F1 2013-11-29
5.11.3.2
Mounting to a pole
With the additional pole mounting set NTM 501 04 the case can also be
fixed to a pole or mast with a circumference up to (OLD:750 mm (29 1/2
inches), equal to a 239 mm (9 3/8 inches) diameter post.)
Figure 23: Pole mounting set for outdoor housing
The set include twice of what is shown in the picture.
5.11.4
Base station cabling inside the Outdoor housing
The Outdoor housing has two glands (bushes), one for insertion of the
data cable and the other for the connection cable to external antennas.
5.11.4.1
Cabling for the BS3x0 and BS3x2
These base stations are powered via the data/power cable from, for
example, an ELU31 board. Because no separate power cable is used,
the existing rubber disk used as air tightening for the power cable, can
be kept.
The connection box (NEF 181 01/4) can also be placed inside the
Outdoor housing. If this box is mounted inside the Outdoor housing fix it
using double-sided self adhesive tape or hot-melt adhesive glue (to be
sourced locally).
For the complete mounting of the BS3x0/BS3x2 base stations see
chapter 5.9 Mounting of base station BS3x0 and BS3x2 on page 32.
