6/1531-ANF 901 14 Uen F1 2013-11-29
49
C
ABLING
6.3 Assembling
N/A
6.4 Connection
N/A
7
Cabling
7.1 Introduction
The cable quality is an important factor to achieve a successful INTE-
GRATED DECT installation, neglecting this causes unstable and trou-
blesome systems. Standard Aastra cables that are referred to below
fulfils these requirements. Cabling between MDF or MDM for base
station connection and for synchronization must also follow these
recommendations see chapter 7.2 Cable requirements on page 51.
Two types of front cabling are used on the ELU31 board, for connecting
base stations and to make sure that all boards in the system are
synchronized. The synchronization and communication within a maga-
zine are distributed via the backplane when LBP22 or later. An illustra-
tion of how the synchronization ring can be connected is shown, see
figure 25 An example of a multi Server system on page 50.
