6/1531-ANF 901 14 Uen F1 2013-11-29
33
M
OUNTING
& I
NSTALLATION
Table 4 Orderable items
Note:
Two omnidirectional single antenna sets are required per BS34x
base station.
Visual indications
See chapter “BS3x0” in “Installation Guide Base Station”
5.9.2 Base
station
cabling
The base station cable must be a twisted pair cable with 2 pairs minimum
for connection of the data lines. Also power is distributed via these data
pairs.
A three-pair cable may be used when additional power wires (EPP) are
required to increase the distance between the base station and the
ELU31.
The base station is connected to the local MDF via a terminal box, NEF
181 01/4 and a terminal cord, TRS 986 15/0, see figure 16 Connections
when using 2 EPP pairs on page 34. The terminal box, NEF 181 01/4, is
connected to the local MDF using screw connectors in both ends. Then
the terminal cord, TRS 986 15/0, is connected between the terminal box
and the base station.
Item
Product number
Quantity
Omnidirectional single antenna set
NTM/KRENB 101 119/1
1
Directional dual antenna set
NTM/KRENB 101 121/1
1
