26
AastraLink RP System Administrator Guide
Using Administrator
Note: If you do not see the phone that you just connected, click Refresh in the Tasks
pane. If you still do not see the phone make sure the phone is connected to the LAN
with a working cable. Unplug the phone from the power source, then plug it back
in. After plugging in the phone you may need to wait at least sixty seconds before
the phone is initialized and ready to be configured.
5. Click
Next
to display the
Who will receive calls on this phone
page.
6. Click
Assign User.
The
Administrator-Select
dialog opens.
7. Select a user from the list, or add a new user by clicking
New User
and typing the
correct information on the
Identification
tab. Click
OK
when finished.
8. Click
Next
to confirm your choice of phone user.
