A&D TM-2441, Инструкция по эксплуатации

Страница: 88 / 120

68
Approximately
1 - 2 cm above
Cuff
Ring
White artery position mark
Have room to insert two
fingers
White artery
position mark
Brachial artery
How to put on the cuff, recorder and holder
Step 1. Pass the end of the cuff through the ring and make a bracelet
shape.
Step 2. Find the brachial artery in the left arm using palpation.
Step 3. Attach the cuff directly against the skin, so that the white mark
is directly over the brachial artery and the lower edge of the cuff
is put on approximately 1 - 2 cm above the inside of the elbow.
Step 4. Wrap the cuff, so that the ring is within the range, is flat and
does not slip down, but there is room to insert two fingers.
Step 5. Fix the air hose using adhesive tape, so that it passes over
the shoulder.
Step 6. Pass the belt through the carry holder.
Step 7. Adjust the belt so that the carry holder is on the left side.
Step 8. Connect the air plug to the air socket on the recorder.
Step 9. Put the recorder into the carry holder.