A&D TM-2441, Инструкция по эксплуатации

Страница: 44 / 120

24
To set the program for S-BPM.
Step 1. Set the AUTO switch to " OFF ".
Step 2. While pressing and holding the / switch, press and hold the
START/STOP switch until is displayed on the LCD.
Step 3. The operations are as follows:
Refer to " 8.4. S-BPM Programs ".
/ switch ..................... Change the current parameter.
START/STOP switch ...... Decision, next item, end of settings.
To measure the blood pressure during S-BPM immediately.
( Manual blood pressure measurement of S-BPM )
Step 1. If the LCD is hidden, press the
START/STOP or EVENT switch to return to the S-BPM
waiting mode display.
Step 2. Press the / switch during the S-BPM waiting mode.
The blood pressure measurements for " 1 scope " are performed
immediately.
" 1 scope " consists of a set of blood pressure measurements and
interval times which are repeated for the number times in the
measurement count. The last interval time is omitted.
The S-BPM
waiting mode is a state when blood pressure
is not measured during the interval time and between the last
"
1 scope " and next " 1 scope ".