A&D TM-2441, Инструкция по эксплуатации

Страница: 56 / 120

36
T : Interval time
6.2.2. S-BPM Waiting Mode
Operation mode and pressure value are displayed on the LCD during
S-BPM waiting mode.
# The LCD will be hidden automatically after no-operation is continued
for few minutes. Even if the LCD is hidden, the manual blood
pressure measurement can be started when the / switch
is pressed. When the START/STOP or EVENT switch is
pressed, the display resumes.
A " 1 scope " consists of a set of blood pressure measurements and
interval times which are repeated up to the number of times of the
measurement count. The last interval time is omitted.
Clock mark blinks on the LCD during a " 1 scope " interval time.
The S-BPM waiting mode is a state when blood pressure is not being
measured during the "interval time" and between the last " 1 scope " and
next " 1 scope ".
Program of the S-BPM
Pressurization value
Current time
Press the / switch to start " 1 scope ".
T
Time
T T T
Not measured
Press the / switch to stop " 1 scope ".
1 scope 1 scope
Start time of alarm