Setting Up 3DM Preferences
www.3ware.com
83
•
Information
will send e-mails for all events
•
Warning
will send e-mail for events with severity of Warning and Error.
•
Error
will send e-mail for events with severity of Error only.
Events are listed on the 3DM
Alarms
page.
Event notification can be set up during 3DM installation, and can be changed
on the 3DM 2 Settings page.
To set up event notification
1
Click
3DM 2 Settings
on the menu bar.
2
In the
E-mail Notification
section of the 3DM 2 Settings page, enter or
change the settings you want.
•
Enable or Disable all notifications.
•
Set the severity level of events for which e-mail notifications are sent.
•
Specify the email address of the sender. This will appear in the
“From” field of the e-mail.
•
Enter the e-mail address(es) to which notifications are sent. (Separate
multiple addresses with a comma (,) or a semicolon (;).
•
Enter the SMTP server name or IP of the mail server for the computer
where the 3ware controller is installed.
3
Click
Save E-mail Settings
.
To send a test message
You can send a test message to make sure you’ve entered the e-mail
notification settings correctly.
•
Click
Send Test Message
.
Enabling and Disabling Remote Access
When remote access is enabled, a user can connect to 3DM over the internet
or an intranet, to check status or administer the controller and associated
drives. (See “Viewing 3DM Remotely Using a Web Browser” on page 76.)
If remote access is disabled and a user attempts to connect to 3DM remotely,
they will see the following error message: “Remote Access to 3DM has been
disabled. Please connect using the local machine by entering “localhost” in
the URL bar.”
Remote access can be enabled or disabled on the 3DM 2 Settings page.
