2N Lift8, Руководство пользователя, Страница: 238 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 238/377
Events Menu
When an event is detected, you can specify a list of tasks to be performed: Activation,
Deactivation, Send SMS, Send system SMS and Error call. activates the Activation
relay contacts. Select more parameters in the extended settings to the right: module
number on which the relay state change occurs, output number including description
for better orientation and task duration. deactivates the relay and is Deactivation
configured similarly. The only difference is , where you enter a phone Send SMS
number and SMS text of the maximum length of 160 or 70 characters depending on
the encoding type. Use GSM 03.38 or UCS 2 for diacritics and non-standard character
sets. One SMS is sent at a time. Long, multipart SMS are not supported. Send system
means that the message text is pre-defined in the system and the only parameter SMS
to be completed is the phone number. If you select , the CU shall make a call Error call
to the number defined in the error call set: parameters 081–086. The error information
is then transmitted via CPC or P100. Click Save to device to save the actions into the
device.