2N Lift8, Руководство пользователя

Страница: 209 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 209/377
4.10 Rescue Activation and End
Rescue Process Activation
Set parameter 992 (Rescue password) to activate the rescue process. If an alarm call
is set up, the yellow LED will keep shining on the audio unit after the call end to
indicate an active rescue process.
Rescue Process End
There two ways how to end a rescue process.
Call the CU ( 9 for administration – 2 for rescue end – select the shaft – enter the
password).
Set the IO module input (via – IO modules – create the "rescue 2N Service Tool
®
end" action and assign it to one of the IO modules).
When the rescue process has been ended, the active audio unit will report: "Rescue
process ended".
Event after Rescue Process End
When the rescue process has been completed, any of the following events can be
executed:
IO module output activation
IO module output deactivation
Send SMS – set the phone number and text (for the GSM/UMTS module only)
Send system SMS – set the phone number (for the GSM/UMTS module only)
Operational call – this call is set up to the number defined in parameters 081–088
(Operational call) and uses CPC Antenna, CPC KONE or P100 for transmissions
Use the Events menu (Rescue end) for configuration. 2N Service Tool
®
Caution
Multiple events can be set up (output acti operational call, e.g.).
SMS can be sent only if the GSM/UMTS module is installed.
If you set the operational call option and CPC/P100 2N ext confirmation,
the audio unit type (cabin 1 or 2) and shaft number is displayed for the
server). rescue process (if the call is received via the 2N Lift8
®