ZyXEL Communications USG110, User Manual

Page: 371 / 1090

Chapter 10 Interfaces
ZyWALL USG Series User’s Guide
371
10.10.2 Bridge Add/Edit
This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP settings,
and connectivity check for each bridge interface. To access this screen, click the
Add or Edit icon in the
Bridge Summary screen. The following screen appears.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the interface.
Description This field displays the description of the interface.
IP Address This field displays the current IP address of the interface. If the IP address is 0.0.0.0, the
interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address ( STATIC ) or dynamically
assigned ( DHCP ). IP addresses are always static in virtual interfaces.
Member This field displays the Ethernet interfaces and VLAN interfaces in the bridge interface. It is
blank for virtual interfaces.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 124 Configuration > Network > Interface > Bridge (continued)
LABEL DESCRIPTION