manualshive.com logo in svg

ZyXEL Communications USG110, User Manual

Share
Download
ZyXEL Communications USG110 User Manual Download Page 179

 Chapter 5 Quick Setup Wizards

ZyWALL USG Series User’s Guide

179

•

Rule Name

: Type the name used to identify this L2TP VPN connection (and L2TP VPN gateway). You 

may use 1-31 alphanumeric characters, underscores (

_

), or dashes (-), but the first character cannot 

be a number. This value is case-sensitive.

•

My Address (interface)

: Select one of the interfaces from the pull down menu to apply the L2TP VPN 

rule.

•

Pre-Shared Key

: Type the password. Both ends of the VPN tunnel must use the same password. Use up 

to 128 case-sensitive ASCII characters or up to 128 pairs of hexadecimal (“0-9”, “A-F”) characters. 

Proceed a hexadecimal key with “0x”. You will receive a PYLD_MALFORMED (payload malformed) 

packet if the same pre-shared key is not used on both ends.

Click 

Next

 to continue the wizard.

5.5.2  L2TP VPN Settings

Figure 150   

VPN Settings for L2TP VPN Settings Wizard: L2TP VPN Settings

•

IP Address Pool

: Select 

Range

 or 

Subnet

 from the pull down menu. This IP address pool is used to 

assign to the L2TP VPN clients.

•

Starting IP Address

: Enter the starting IP address in the field.

•

End IP Address

: Enter the ending IP address in the field.

•

Network

: Enter the IPv4 IP address in this field if you selected 

SUBNET

.

•

Netmask

: Enter the associated subnet mask of the subnet in this field.

•

First DNS Server (Optional)

: Enter the first DNS server IP address in the field. Leave the filed as 0.0.0.0 if 

you do not want to configure DNS servers. If you do not configure a DNS server you must know the IP 
address of a machine in order to access it.

•

Second DNS Server (Optional)

: Enter the second DNS server IP address in the field. Leave the filed as 

0.0.0.0 if you do not want to configure DNS servers. If you do not configure a DNS server you must 

know the IP address of a machine in order to access it.

•

Allow L2TP traffic Through WAN

: Select this check box to allow traffic from L2TP clients to go to the 

Internet. 

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands