ZyXEL Communications Prestige 792H, User Manual

Page: 403 / 437

Prestige 792H User’s Guide
VPN/IPSec Setup 36-13
Table 36-3
Menu 27.1.1.1 IKE Setup
FIELD DESCRIPTION EXAMPLE
Perfect
Forward
Secrecy (PFS)
Perfect Forward Secrecy (PFS) is disabled ( None ) by default in phase 2
IPSec SA setup. This allows faster IPSec setup, but is not so secure. Press
[SPACE BAR] and choose from
DH1 or DH2 to enable PFS. DH1 refers to
Diffie-Hellman Group 1 a 768 bit random number. DH2 refers to Diffie-Hellman
Group 2 a 1024 bit (1Kb) random number (more secure, yet slower).
None
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.
36.5 Manual Setup
You only configure Menu 27.1.1.2 – Manual Setup when you select Manual in the Key Management field
in Menu 27.1.1 – IPSec Setup . Manual key management is useful if you have problems with IKE key
management.
36.5.1 Active Protocol
This field is a combination of mode and security protocols used for the VPN. See the Web Configurator part
on VPN for more information on these parameters.
Table 36-4 Active Protocol: Encapsulation and Security Protocol
MODE SECURITY PROTOCOL
Tunnel ESP
Transport AH
36.5.2 Security Parameter Index (SPI)
To edit this menu, move the cursor to the Edit Manual Setup field in Menu 27.1.1 – IPSec Setup press
[SPACE BAR] to select Yes and then press [ENTER] to go to Menu 27.1.1.2 – Manual Setup .