ZyXEL Communications Prestige 792H, User Manual

Page: 181 / 437

Prestige 792H User’s Guide
VPN Screens 14-11
Table 14-7 VPN IKE
LABEL DESCRIPTION
End / Subnet Mask When the
Remote Address Type field is configured to Single , enter the IP address
in the IP Address Start field again here. When the Remote Address Type field is
configured to Range , enter the end (static) IP address, in a range of computers on
the network behind the remote IPSec router. When the Remote Address Type field
is configured to Subnet , enter a subnet mask on the network behind the remote
IPSec router.
Address
Information
Local ID Type Select IP to identify this Prestige by its IP address.
Select DNS to identify this Prestige by a domain name.
Select E-mail to identify this Prestige by an e-mail address.
Content When you select IP in the Local ID Type field, type the IP address of your computer
or leave the field blank to have the Prestige automatically use its own IP address.
When you select DNS in the Local ID Type field, type a domain name (up to 31
characters) by which to identify this Prestige.
When you select E-mail in the Local ID Type field, type an e-mail address (up to 31
characters) by which to identify this Prestige.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address.
My IP Address Enter the WAN IP address of your Prestige. The Prestige uses its current WAN IP
address (static or dynamic) in setting up the VPN tunnel if you leave this field as
0.0.0.0. The VPN tunnel has to be rebuilt if this IP address changes.
Peer ID Type Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.