ZyXEL Communications Prestige 792H User Manual Download Page 47

Page: 47 / 437

Prestige 792H User’s Guide

Wizard Setup

3-1

Chapter 3

Wizard Setup

This chapter provides information on the Wizard Setup screens in the web configurator.

3.1 Wizard Setup Introduction

Use the Wizard Setup screens to configure your system for Internet access settings and fill in the fields with
the information in the

Internet Account Information

table of the

Quick Start Guide

Read Me First

. Your

ISP may have already configured some of the fields in the wizard screens for you.

3.2 WAN

Setup

Use the first wizard screen

to configure G.SHDSL settings for your WAN line. Different telephone

companies deploy different types of G.SHDSL service. If you are unsure of any of this information, please
check with your telephone company.

3.2.1 Service Type

Is your Prestige acting as a Server or Client?

1. The Prestige is a server if it is acting as a COE (Central Office Equipment). It will determine transfer

rate and mode.

2. The Prestige is a client if it is acting as a CPE (Customer Premise Equipment).

3.2.2 Rate Adaption

Both the Prestige and the peer must have the same transmission rate. Rate Adaption allows the Prestige to
auto-detect the peer transfer rate.

Summary of Contents for Prestige 792H






















































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 792H

Reviews:

Related manuals for Prestige 792H

Brands by name

Popular brands

ZyXEL Communications Prestige 792H, User Manual

Search results

Summary of Contents for Prestige 792H

Reviews:

Related manuals for Prestige 792H

Brands by name

Popular brands