ZyXEL Communications P-873HNU-51B, User Manual

Page: 30 / 339

Chapter 2 The Web Configurator
P-873HNU(P)-51B User’s Guide
30
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
STB Vendor ID Use this screen to have the VDSL Router automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP addresses.
HPNA Use this screen to enable or disable the HPNA port.
5th Ethernet
Port Use this screen to configure the Ethernet WAN port as a LAN port.
LAN VLAN Use this screen to control the VLAN ID and IEEE 802.1p priority tags of
traffic sent out through individual LAN ports.
Routing Static Route Use this screen to view and set up static routes on the VDSL Router.
Policy
Forwarding Use this screen to configure policy routing on the VDSL Router.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
Monitor Use this screen to view QoS packets statistics.
NAT Port Forwarding Use this screen to make your local servers visible to the outside world.
Applications Use this screen to configure servers behind the VDSL Router.
Port Triggering Use this screen to change your VDSL Router’s port triggering settings.
DMZ Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Sessions Use this screen to limit the number of NAT sessions a single client can
establish.
DNS Setting DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP address.
IGMP Setting General Use this screen to configure general IGMP proxy and IGMP packet
processing settings.
IGMP Filter Use this screen to control IGMP access.
IGMP ACL Use this screen to block or allow access to specific multicast media
channels.
Interface
Group
Interface Group Use this screen to map a port to a PVC or bridge group.
Security Settings
Firewall General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add or remove predefined Internet services and
configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network services.
MAC Filter MAC Filter Use this screen to block or allow traffic from devices of certain MAC
addresses to the VDSL Router.
Table 3
Navigation Panel Summary (continued)
LINK TAB FUNCTION