ZyXEL Communications P-873HNU-51B, User Manual

Page: 41 / 339

Chapter 4 Tutorials
P-873HNU(P)-51B User’s Guide
41
4.4.2 Using WPS
This section shows you how to set up a wireless network using WPS. It uses the VDSL Router as the
AP and ZyXEL NWD210N as the wireless client which connects to the notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCMCIA card).
There are two WPS methods to set up the wireless client settings:
• Push Button Configuration (PBC) - simply press a button. This is the easier of the two
methods.
• PIN Configuration - configure a Personal Identification Number (PIN) on the VDSL Router. A
wireless client must also use the same PIN in order to download the wireless network settings
from the VDSL Router.
Push Button Configuration (PBC)
1
Make sure that your VDSL Router is turned on and your notebook is within the cover range of the
wireless signal.
2
Make sure that you have installed the wireless client driver and utility in your notebook.
3
In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button
(Start or WPS button).
4
Push and hold the WPS button located on the VDSL Router’s front panel for more than 5 seconds.
Alternatively, you may log into VDSL Router’s web configurator and go to the Network Settings >
Wireless > WPS screen. Enable the WPS function and click Apply. Then click the Connect button.