ZyXEL Communications P-873HNU-51B, User Manual

Page: 240 / 339

Chapter 27 Remote Management
P-873HNU(P)-51B User’s Guide
240
Figure 123
Maintenance > Remote MGMT > TR-069 Client
The following table describes the fields in this screen.
Table 100
Maintenance > Remote MGMT > TR-069 Client
LABEL DESCRIPTION
Inform Select Enable for the VDSL Router to send periodic inform via TR-069 on the
WAN. Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the VDSL Router sends
information to the auto-configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration
server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration
server.
WAN Interface
used by TR-069
client Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN, you should also select the pre-configured WAN
connection(s).
Display SOAP
messages on serial
console Select Enable to show the SOAP messages on the console.
Connection
Request
Authentication Select this option to enable authentication when there is a connection request
from the ACS.
Connection
Request User
Name Enter the connection request user name.
When the ACS makes a connection request to the VDSL Router, this user name
is used to authenticate the ACS.
Connection
Request Password Enter the connection request password.
When the ACS makes a connection request to the VDSL Router, this password
is used to authenticate the ACS.
Connection
Request URL This shows the connection request URL.
The ACS can use this URL to make a connection request to the VDSL Router.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.