ZyXEL Communications P-873HNU-51B, User Manual

Page: 89 / 339

Chapter 7 Wireless
P-873HNU(P)-51B User’s Guide
89
The following table describes the labels in this screen.
7.3 The More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the VDSL
Router.
Click Network Settings > Wireless > More AP. The following screen displays.
Figure 27
Network Settings > Wireless > More AP
Table 15
Wireless > General: More Secure: WPA(2)
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA(2)-PSK data encryption.
Security Mode Choose WPA or WPA2 from the drop-down list box.
Authentication Server
IP Address Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number Enter the port number of the external authentication server.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the VDSL Router.
The key must be the same on the external authentication server and your VDSL
Router. The key is not sent over the network.
more.../less Click more... to show more fields in this section. Click less to hide them.
WPA Compatible This field is only available for WPA2. Select this if you want the VDSL Router to
support WPA and WPA2 simultaneously.
Encryption Select the encryption type (AES or TKIP+AES) for data encryption.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
Group Key Update
Timer The Group Key Update Timer is the rate at which the RADIUS server sends a
new group key out to all clients.
ReKey Method The VDSL Router can automatically disconnect a wireless station from the
wired network after a period of inactivity or after a certain number of packets
have been processed. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
• Select TIME to have the VDSL Router automatically disconnects a wireless
station from the wired network after a period of inactivity.
• Select NONE if you do not want the connection between the VDSL Router
and a wireless station to time out.