manualshive.com logo in svg

ZyXEL Communications P-873HNU-51B, User Manual

Share
Download
ZyXEL Communications P-873HNU-51B User Manual Download Page 329

P-873HNU(P)-51B User’s Guide

329

A

P P E N D I X

      F

Legal Information

Copyright

Copyright © 2012 by ZyXEL Communications Corporation.

The contents of this publication may not be reproduced in any part or as a whole, transcribed, 
stored in a retrieval system, translated into any language, or transmitted in any form or by any 
means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, 
without the prior written permission of ZyXEL Communications Corporation.

Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any products, or 
software described herein. Neither does it convey any license under its patent rights nor the patent 
rights of others. ZyXEL further reserves the right to make changes in any products described herein 
without notice. This publication is subject to change without notice.

Trademarks

ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL Communications, 
Inc. Other trademarks mentioned in this publication are used for identification purposes only and 
may be properties of their respective owners.

Certifications 

Federal Communications Commission (FCC) Interference Statement

The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause 

undesired operations.

This device has been tested and found to comply with the limits for a Class B digital device pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This device generates, uses, and can radiate radio 
frequency energy, and if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that interference will 
not occur in a particular installation.

Summary of Contents for P-873HNU-51B




















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands