ZyXEL Communications P-873HNU-51B, User Manual

Page: 49 / 339

Chapter 4 Tutorials
P-873HNU(P)-51B User’s Guide
49
Tutorial: NAT Port Forwarding Setup
Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see
Section 11.2 on page 154 for more information).
1
Click Network Settings > NAT > Add new rule and configure the screen with the following
values:
2
The screen should look as follows. Click Apply.
3
The port forwarding settings you configured appear in the table. The VDSL Router forwards port
666 traffic to the computer with IP address 192.168.1.34.
D =192.168.1.34
WAN
LAN
port 666
A
Service Name Doom_Server
WAN Interface Select the WAN interface through which the Doom service is forwarded.
This example uses MyDSLConnection.
External Port/s Enter 666 as the Start and End port.
Server IP Address Enter the IP address of the Doom server. This is 192.168.1.34 for this
example.
Protocol Select TCP/UDP. This should be the protocol supported by the Doom
server.