ZyXEL Communications P-2608HWL-D1, User Manual

Page: 172 / 451

P-2608HWL-Dx Series User’s Guide
172 Chapter 12 Phone
Figure 92 VoIP > Phone > Analog Phone
Each field is described in the following table.
12.2.2 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone .
Table 60 VoIP > Phone > Analog Phone
LABEL DESCRIPTION
Phone Port
Settings
Select the phone port you want to see in this screen. If you change this field, the
screen automatically refreshes.
Outgoing Call Use
SIP1 ... SIP8 Select which SIP accounts you want to use for outgoing calls. If you select multiple
accounts then the ZyXEL Device will try to use the lower numbered SIP account
first.
Incoming Call
apply to
SIP1 ... SIP8 Select which SIP accounts you want to receive phone calls from on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
PSTN Line Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.