ZyXEL Communications eircom D1000, User Manual

Page: 203 / 226

Chapter 24 Remote Management
201
eircom D10
00 modem User’s Guide
Figure 138
Maintenance > RemoteMGMT > SNMP
The following table describes the labels in this screen.
Table 83
Maintenance > RemoteMGMT > SNMP
LABEL DESCRIPTION
Server Port This displays the port the SNMP agent listens on. If the number is grayed out, it is not
editable.
Server Access Select the interface(s) through which a computer may access the Device using this
service.
Secured Client IP
Address A secured client is a “trusted” computer that is allowed to access the SNMP agent on the
Device.
Select All to allow any computer to access the SNMP agent.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to access the Device using this service.
Get Community Enter the Get Community , which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Set Community Enter the Set community , which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Apply Click Apply to save your changes back to the Device.
Cancel Click Cancel to begin configuring this screen afresh.
24.6 The DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa.
Use this screen to set from which IP address the Device will accept DNS queries and on which
interface it can send them your Device’s DNS settings. This feature is not available when the Device