For technical questions, please call 1-888-866-5797
45
About the Scan Tool
DISPLAY FUNCTIONS
3
5. M (Menu) button
– When pressed, displays the Main Menu.
6. LD button
– When pressed while linked to a vehicle, places the
Scan Tool in Live Data mode.
7.
UP button
– When in MENU mode, scrolls UP through the
menu options. When LINKED to a vehicle, scrolls UP through the
current display screen to display any additional data.
8.
ENTER button
- When in Menu mode, confirms the selected
option or value.
9.
DOWN button
- When in MENU mode, scrolls down through the
menu options. When LINKED to a vehicle, scrolls down through the
current display screen to display any additional data.
10. GREEN LED
- Indicates that all engine systems are running
normally (all Monitors on the vehicle are active and performing their
diagnostic testing, and no DTCs are present).
11. YELLOW LED
- Indicates there is a possible problem. A “Pending”
DTC is present and/or some of the vehicle's emission monitors have
not run their diagnostic testing.
12. RED LED
- Indicates there is a problem in one or more of the
vehicle's systems. The red LED is also used to show that DTC(s)
are present. DTCs are shown on the Scan Tool’s LCD display. In
this case, the Malfunction Indicator (“Check Engine”) lamp on the
vehicle's instrument panel will light steady on.
13. Display
- Displays test results, Scan Tool functions and Monitor status
information. See DISPLAY FUNCTIONS, below, for details.
14. CABLE
- Connects the Scan Tool to the vehicle's Data Link Connector
(DLC).
DISPLAY FUNCTIONS
Figure 2. Display Functions
See Figure 2 for the locations of items 1 through 15, below.
1. I/M MONITOR STATUS field
- Identifies the I/M Monitor status area.
4
3
2
5
7
6
1
14
10
11
12
8
9
13
15
ADJUSTMENTS AND SETTINGS
Additional Tests
ADJUSTMENTS AND SETTINGS
45
The screen provides a description of the meanings of the green,
yellow and red
SYSTEM STATUS
LEDs.
2.
When you have finished viewing the LED meanings, press
M
to
return to the Main Menu.
ADJUSTMENTS AND SETTINGS
The Scan Tool lets you make several adjustments and settings to
configure the Scan Tool to your particular needs. The following
adjustments and settings are available:
Adjust Brightness
: Adjusts the brightness of the display screen.
Audible Tone:
Turns the Scan Tool’s audible tone “on” and “off.”
When turned “on,” a tone sounds each time a button is pressed.
Footer Messages
: Turns the navigational “footers” at the bottom of
most display screens “on” and “off.”
Hotkey Legend
: Shows functional descriptions for the Scan Tool’s
hotkeys.
Language Selection
: Sets the display language for the Scan Tool
to English, French or Spanish.
Unit of Measurement
: Sets the Unit of Measurement for the Scan
Tool’s display to USA or metric.
To enter the Tool Settings mode:
1.
While linked to the vehicle, press and
release
M
.
The Main Menu displays.
2.
Select
Tool Settings
, then press
ENTER
.
The Tool Setting menu displays.
3.
Make adjustments and settings as follows.
Adjusting Display Brightness
1.
Select
Adjust Brightness
in the Tool
Settings menu, then press
ENTER
.
The Adjust Brightness screen displays.
2.
Press
UP
and
DOWN
to make
the display lighter or darker, then press
ENTER
to save your changes.
To return to the Tool Settings menu without making changes,
press
M
.
Summary of Contents for ZR13s
Page 1: ......
