Zultys ZIP4x4, User Manual

Page: 76 / 194

66
ZIP4x4 User’s Manual
7.7 Pickup
The functionality of call park and call pickup are dependent on the phone system. You can pickup
an individual call or a conference call that has been parked with the Park function as described in
section 7.6 on page 64.
You can pickup a call that you parked yourself or that another person parked. You cannot pickup
a call that was parked if the other party terminated the call while the call was parked.
7.7.1 Individual Call
You can resume a conversation that has been previously put on hold with the Park function using
any ZIP4x4 phone. Press the Pickup button. The phone lights the LED continuously red on the
Park button and displays:
Enter the two digit number for the parked call and press the Enter button or the # key. If you
specify an invalid number (or if the party who was parked terminated the call in the mean time),
the phone displays:
If the phone is off hook, the phone will play the fast busy tone when you have entered an invalid
number. You can enter a valid number or press the Esc button to exit the function.
Once the phone is connected to the parked call, the phone turns off the LED on the Pickup button
and changes the display to the usual display of a call being connected, as described in section 8.3.5
on page 82.
If you forget the two digit number, call the operator for assistance. The operator may be able to
assist you to find the number.
If you pickup a parked call that you had not intended to pickup, park the call again. Call the
operator and tell the operator what has happened.
7.7.2 Conference Call
To pickup a conference call, you must pickup each of the calls that was parked. Therefore, you
use the pickup function more than once to resume the conference.
1. Press the Pickup button.
The phone lights the LED continuously red on the Park button and displays:
Pickup from
}
Pickup from
}37
(36 is invalid)
Pickup from
}