Zultys ZIP4x4, User Manual

Page: 74 / 194

64
ZIP4x4 User’s Manual
You can enter the name or number from the keypad as you would if you were making a call, or
from a memory location.
1
After you enter a name or number and press the Enter button, the phone lights the LED on the
Fwd button continuously green. If you select off , the LED is turned off.
7.6 Park
The functionality of call park and call pickup are dependent on the phone system. You can park
individual calls and conference calls. The following description is based on connecting your
ZIP4x4 to a phone system that fully supports the park and pickup function.
7.6.1 Individual Call
To park a call, ensure you are in active communication with the person. That is, the LED on the
call appearance button is lit continuously green. Press the Park button. The ZIP4x4 transfers the
call to the park server and appears to the other person as if the call has been placed on hold.
2
The
person with whom you were talking hears music on hold supplied by the phone system.
3
The system issues you a two digit number and the screen changes to:
You must note the two digit number that the system issues to you (in the example above it is 37).
The display remains unchanged until another action takes place.
The phone transfers control of the call to the phone system, turns off the LED on the call
appearance button, turns the LED on the Park button continuously red, and sounds an audible
double beep in the earpiece or speaker. You can place the phone on hook.
The phone continues to display the screen shown above, and continues to light the LED on the
Park button, until you go on hook, press a call appearance button, or use another function or
feature of the phone. If the phone receives an incoming call, it will retain the display for a
minimum of two seconds.
The phone does not provide dial tone until you go on hook and off hook again or you press a call
appearance button.
To retrieve the call use the Pickup function as described in section 7.7 on page 66.
Forward
when busy
}1415
1. See section 8.7.3 on page 96 and section 8.7.4 on page 97 for a description of how to specify a memory location.
2. See section 9.6.5 on page 141 for details how to configure the address of the park server.
3. See section 8.5.2 on page 89 for a description of the hold function.
Park on 37
Lancelot Capability
Brown