Zultys ZIP4x4, User Manual

Page: 158 / 194

148
ZIP4x4 User’s Manual
The phone continues to send messages. When it receives a response to a message it updates the
second and third rows of the display. The ZIP4x4 continues in this way until it has sent 99
messages or until you press the Esc button to stop the process. When you stop the process, the
phone waits the time-out period for any reply that it might be expecting. The phone displays:
The phone shows the number of echo request messages that it sent and the number of echo reply
messages that it received (before it timed out).
Press Menu, Esc, or Enter to exit this test. If you press Menu, the phone exits the menu system. If
you press Enter or Esc, the phone displays the Self Test menu shown in section 9.7.1 on page 146.
9.7.3 Loop Ethernet Ports
This allows you to test the four Ethernet circuits on the phone. To conduct this test, you must
power the ZIP4x4 from an ac adapter.
1
When you select this, the display shows:
Using two CAT5 cables, connect:
2
•
Ethernet port P1 to Ethernet port P2
•
Ethernet port P3 to Ethernet port LAN
Press the Enter button when you have done so. The phone displays:
The phone sends data packets from P1 to P2, from P2 to P1, from P3 to LAN, and LAN to P3. It
sends up to 999 packets out of each circuit, or until you press the Esc button to stop the process.
It receives the packets and checks for errors. If it receives a packet with no errors it shows this on
the bottom row. If it fails to receive a packet within 25 ms or if the packet has errors, it does not
count this in the totals on the bottom row.
The bottom row shows how many packets each circuit has received. If there are no errors, the
counts will all be the same. If you let the test run for the maximum number of 999 packets, each
value should be 999.
Press Menu, Esc, or Enter to exit this test. If you press Menu, the phone exits the menu system. If
you press Enter or Esc, the phone displays the Self Test menu shown in section 9.7.1 on page 146.
Ping: 10.1.40.25
Sent 56. Received 49
Min047;Avg481;Max673
Test | Ethernet
Connect P1 to P2, P3
to LAN. Press Enter
1. See section 4.1.2.2 on page 21 for details of how to connect an ac adapter.
2. The cables you use can be straight or cross wired. See section 4.1.4.1 on page 22 for details.
Test | Ethernet
P1-P2 P3-LAN
000 000 000 000