Zultys ZIP4x4, User Manual

Page: 48 / 194

38
ZIP4x4 User’s Manual
Many parameters in the configuration files correspond to the parameters that you can configure
through the menu of the ZIP4x4. Configuration parameters are described in Appendix C, starting
on page 161.
Every time the phone restarts (either by command or by power on), the phone reads the
configuration files. It extracts the data in the files and saves it to memory, overwriting all
parameters that are saved in memory except that if the user settings are not configured to be
cleared, it retains the settings in the phone.
1
The common configuration file specifies a directory, using the parameter:
2
tftp_cfg_dir= <directory_name>
The phone accesses the specified directory (which can be blank, or ‘.’) and reads the specific
configuration file from the specified directory. It extracts the data in the file and saves it to
memory, overwriting whatever parameters were already saved in memory. The parameters
specified in the specific configuration file take precedence over the same parameters specified in
the common configuration file.
For example, suppose the common configuration specifies the greeting message to be:
[AUDIO_INFO]
ext_ring_tone=0
ext_cust_ring=
int_ring_tone=0
int_cust_ring=
ring_tone2=0
cust_ring2=
key_click=0
codec=0
distinctive_ring=yes
accept_url=no
sound_url=
[GENERAL_INFO]
software_version=1.0.0
;The message displayed on the LCD in idle mode
greeting_message=ZIP 4x4 SIP Phone
password=985897
time_fmt=%H:%M
date_fmt=%a %d %b %y
date_time_order=0
;This is the offset from GMT, in minutes
timezone=-480
country=USA
language=ENGLISH
delmtr=._
clear_settings=2
1. You select whether you want the user settings cleared using the menu, as described in section 9.5.3.
2. If the specific configuration file contains such a line, the phone ignores it.
Figure 5-1 Format for Configuration File (Continued)