Zultys ZIP4x4, User Manual

Page: 81 / 194

71
C h a p t e r 8
Using the Phone
8.1 Going Off Hook and On Hook
You can use the handset, headset, or speaker for any call and easily switch between them – even
during the same call. Subsequent sections detail the processes for making and terminating a call.
This section briefly describes how to select between the three audio paths.
8.1.1 Using the Handset, Headset, and Speaker
To use the handset, pick it up. When you have finished using it, replace it in the cradle.
To use the headset, press the Hook button. When you have finished using it, press the Hook
button again. When the headset is active, the phone lights the LED on the Hook button
continuously red. When the headset is inactive, the phone turns off the LED.
To use the speaker, press and release the Speaker key. When you have finished using it, press the
key again. When the speaker is active, the phone lights the LED on the Speaker key continuously
red. When the speaker is inactive, the phone turns off the LED.
8.1.2 Off Hook
The term off hook means that you do one of the following:
•
pick up the handset
•
press the Hook button so that it is active (LED is lit continuously red)
•
press the Speaker key so that the speaker is active (LED is lit continuously red)
The phone is said to be off hook when you have done any one of these things.
8.1.3 On Hook
The term on hook means that you do all of the following:
•
replace the handset in the cradle
•
press the Hook button so that it is inactive (LED is off)
•
press the Speaker key so that the speaker is inactive (LED is off)
The phone is said to be on hook when all of these conditions are met.