Zultys ZIP4x4, User Manual

Page: 144 / 194

134
ZIP4x4 User’s Manual
•
domain name
•
subnet mask
•
address of the default gateway (you can specify this as an IP address or an FQDN)
•
IP address of the DNS server
•
IP address of the secondary DNS server
•
address of the NTP server (you can specify this as an IP address or an FQDN)
•
address of the TFTP server (you can specify this as an IP address or an FQDN)
If you enable DHCP you should not ordinarily modify these parameters on the ZIP4x4. If the
server does not provide all of these parameters, or if you want to make a change to one of the
parameters, you can set it from the appropriate screen.
1
When you disable DHCP, you must enter these parameters manually.
2
Phone Address. This is the IP address that the phone has obtained dynamically through DHCP or
is a static address that you manually configure.
Subnet Mask. This identifies the subnet mask for the phone.
Default Gateway. This is the IP address for the gateway on the same subnet on which the phone
resides.
DNS Server. This is the IP address for the server that provides address resolution (DN to IP
address) for the phone.
1. In the version of software available as of the time of writing, you need to reboot the phone for any changes to the IP
parameters to take effect. If the phone reads data from the DHCP server during the boot up process, it will overwrite
whatever parameter you have modified if the server provides that parameter. The phone will not overwrite parameters
that are absent in the data that it receives from the DHCP server.
2. For each of the parameters that you enter from the keypad, you can enter only an IP address and cannot enter an FQDN.
PSettings | IP
Address of phone
}192.168.0.6
PSettings | IP
Subnet mask
}255.255.254.0
PSettings | IP
Default gateway
}10.1.30.1
PSettings | IP
DNS server
}10.1.10.1