Zultys ZIP4x4, User Manual

Page: 53 / 194

5. Provisioning the Phone
43
To start the update process, the software in the phone restarts and displays:
The phone displays this message using different characters than normal, and only two lines of
text. It shows the progress of the update on the second line using periods (full stops). There are
20 characters on the line and each period indicates the phone has completed about 5% of the
programming task. The phone shows a new period every one to three seconds.
Important
Do not disturb the phone during the update process. You cannot use the phone
to make or receive calls while the software is being updated. This process takes
about 30 seconds.
When the phone has provisioned the software, it restarts itself, just as it does when you power it
on. After about 15 seconds the phone displays the idle display and is ready to use.
If the software update process fails, the phone may display:
The phone displays this message if it found the software file but the file had been corrupted.
Contact the system administrator to resolve this. You will not be able to use the phone until you
resolve the problem.
U p d a t i n g s o f t w a r e
. . . . . . . . . . . .
U p d a t i n g s o f t w a r e
F a i l e d . . . . . .