Zultys ZIP4x4, User Manual

Page: 69 / 194

7. Special Functions
59
4. Press the Enter button or the Down button.
The display changes to:
5. Type your system password (PIN) and press the Enter button.
The display echoes the * character as you type your password.
6. If you correctly typed the extension and password, the phone lights the LED on the User
button green continuously to indicate that one or more additional users are logged into the
phone. When you use the headset, the same LED is lit continuously red.
The phone displays whatever was being displayed prior to your pressing the User button.
7. If the phone encounters an error, it displays one of the screens shown in section 7.9 on page
68.
Once you have logged yourself into the phone, the system can send calls to this phone as well as
any other devices that you may have registered with it.
7.3.3 Log Out
When you move away from a phone that you have logged into, you should log out so that your
calls are no longer sent to that phone. If you forget the log out, the phone’s owner can log you out
because you do not need a password to log out.
To log out of a phone, do the following:
1. Select User | Log out.
2. The display changes to:
The display shows the names of all the users who have temporarily logged into the phone.
If more than one user has logged into the phone, the phone displays “all” as the first
selection.
3. Use the Up and Down buttons to select the individual you want to log out, or select “all” to
log out all users, and press the Enter button.
4. The phone ceases to light the LED on the User button green continuously if there are no
other additional users logged into the phone and no user is logged into an ACD group or
operator group. When you use the headset, the same LED is lit continuously red.
5. If there were no users logged into the ZIP4x4, the display shows instead:
User log in
Extension
5001
Password }
User log out
}all
Lancelot Capability
User log out
No user is logged in