Zte Avid 916, User Manual

Page: 66 / 77

128 129
TROUBLESHOOTING
If you encounter problems while using the phone, or if it performs abnormally,
you can refer to the chart below . If your particular problem cannot be resolved
using the information in the chart, contact Consumer Cellular customer support
at (800) 686-4460 .
Problem Possible causes Possible solution
Poor reception
The network signal is too weak at
your current location, (for example,
in a basement or near a tall building),
because wireless transmissions can
not effectively reach it .
Move to a location where the network
signal can be properly received .
The network is busy at the current
time (for example, during peak
times, there may be too much
network traffic to handle
additional calls) .
Avoid using the phone at such times,
or try again after waiting a short time .
You are too far away from a base
station for your service provider .
You can request a service area map
from your service provider .
Echo or noise
Poor network link quality on the part
of your service provider .
End the call and dial again . You may be
switched to a better-quality network link
or phone line .
Poor local telephone line quality .
End the call and dial again . You may be
switched to a better-quality network link
or phone line .
Unable to select
certain features
Your service provider does not
support these features, or you have
not applied for services that provide
these features .
Contact your service provider .
Problem Possible causes Possible solution
Battery not
charging
The battery or battery charger is
damaged .
Call Consumer Cellular customer
support at (800) 686-4460 .
The phone’s temperature is below
32°F (0°C) or higher than 113°F
(45°C) .
Adjust the battery charging
environment to avoid extreme
temperatures .
Poor contact between the battery
and charger .
Check all connectors to make sure all
connections have been properly made .
Shortened
standby time
The standby time is related to
your service provider system
configuration . The same phone
used with different service
providers’ systems will not
provide exactly the same length
of standby time .
If you are located in an area where
signaling is weak, temporarily power
off the phone .
The battery is depleted . In high-
temperature environments, battery
life will be shortened .
Use a new battery .
If you are not able to connect to the
network, the phone will continue
to send out signals as it attempts
to locate a base station . Doing so
consumes battery power and will
consequently shorten standby time .
Change your location to one where the
network is accessible, or temporarily
turn off your phone .
Cannot turn your
phone on
Battery power has been depleted . Recharge the phone’s battery .
TROUBLESHOOTING