Set date and time <DA
TE/TIME>
028
5-2 Set date and time <DATE/TIME>
Each file will automatically record the date/time.
To facilitate searching for files by date, be sure to set the date/time after every battery change.
1
Press.
2
Select <SYSTEM> and press.
3
Select <DATE/TIME> and press.
5
Select <OK> and press.
4
Set YEAR
➝
MONTH
➝
DAY
➝
TIME
(Time: Minute: Second)
Select the item on <DATE/TIME>:
You can select the
item while moving
[ ] of the [DIAL].
[Change the figure number]:
You can select the
number by
rotating
the [DIAL].
Press the [DIAL]
*
The selected item figures are reversed.
Press the [DIAL]
* [ ] comes out on display.
When “Reset DATE/TIME” is seen
on the display at the booting-up,
the date/time needs to be set.
NOTE:
• When power off for more than
three minutes, the setting of the
date/time will be return to the
beginning one.
• You cannot use this setting during
recording and playback.
Summary of Contents for H4next
Page 9: ...Getting started 008 Getting started...
Page 47: ...Operations Operations 046...
Page 136: ...135...
Page 137: ...Reference 136 Reference...