Zoom H4next, Operation Manual

Page: 35 / 156

Setting up: USB connection, H4n used as an Audio Interface
034
Usage of AUDIO INTER FACE
• You can record input signals of
the H4n on the audio track of
DAW software, and listen to its
outcomes.
• You can also work those input
s i g n a l s i n t h e H 4 n b u i l t - i n
<EFFECT> function.
• The <EFFECT> can be used when
the sampling rate is 44.1 kHz.
• Making connection not necessary
for a specific driver.
• W h e n u s i n g d i ff e re n t D A W
s o f t w a re , p l e a s e re a d t h e i r
guidebooks together.
HINT:
• You cannot change a sampling
rate while computer is recognizing
H4n as an audio interface.
• To connect as an Audio I/F, make
sure that a sampling rate (step 6)
matches the recording software
and playback file.
• You cannot use this setting during
recording and playback.
NOTE:
[Button operation during setting and <AUDIO I/F> menu]
Press.
Select
and press.
EFFECT Use EFFECT (only on 44.1 kHz)
TUNER Use TUNER
MONITOR Use MONITOR
PHANTOM Use PHANTOM power
PLUG-IN Use PLUG-IN power
DISCONNECT Disconnect
<AUDIO I/F> MENU
[Selection of input source]
When you press the INPUT button
corresponding to its input source, it lights
and is confirmed the selection.
While not using input, press the lighted
button and make light off, you make no
input condition.
*
No input can send no signals to a computer and
operate no monitoring.
Selecting input, input signals are sent to a
computer.
To monitor the input signals in H4n you
must run <MONITOR> setting on.
[You can use those
buttons during setting]
* Adjust input / output level
* Call [MENU] and make setting