1
On the
Management Settings
page, click
Enable
next to
Remote
Management via SMS
comment to enable remote management of your
Modem/Router.
2
Enter a
Security Key
to control access to the Modem/Router. For example
enter JIM123 in the
Security Key
textbox.
3
Next, select which commands you wish to enable. For example if you want to
be able to check the status and reboot the Modem/Router remotely, click
Enable
next to the
Status
and
Reboot
command.
4
Click
Save
. After the Modem/Router saves the changes, click
Reboot
to make
the changes active.
The Modem/Router is now set up to receive the
Status
and
Reboot
command
from any phone number that enters the correct
Security Key
JIM123. To
test your setup, send a text message to the Modem/Router in this format.
JIM123 status
You will receive an SMS message back with the status of your Modem/Router.
This message will be in the following format:
WAN IP [xxx.xxx.xxx.xxx]
Network [AT&T]
Type [HSUPA]
Conn Time [03:45:20]
52 3G+ Modem/Router with Wireless-N and Phone Port User Manual
Summary of Contents for 4530 Series
Page 1: ...3G Modem Router with Wireless N and Phone Port USER MANUAL ...
Page 2: ......
Page 99: ...or country to country ...